[Groop] Groo Miniatures

[Greg Craill]

I suggest "pinning" the Dragon. Go to any miniatures or hobby shop, and they will have small drills and thin but VERY tough wire.

Drill a hole in one piece of dsragon, chop off a length of wire so a bit sticks out, and glue the wire in, it only needs a few mm each end, (superglue will be fine for metal but also check the hobby shops)

Then press this piece to the next joining bit of dragon to mark where the wire is, drill a small hole in the other piece, and glue the 2 pieces together with the pin in the holes.

This acts as reinforcing and holds the 2 pieces together better as otherwise they can shear off at the joins.

Ask at the hobby shop, they may have some magazines with pictures of how to do this or have gamers there who can advise you.

Try this http://www.paintingclinic.com/clinic/pinning.htm.

Cheers

GC
----- Original Message ----- 
From: Scott 
To: groop at groo.com 
Sent: Saturday, October 16, 2004 12:27 PM
Subject: Re: [Groop] Groo Miniatures


Not to sound really lame here... but WHAT MINIATURE SET???
(checking the couch for spare kopins now)

Friday, October 15, 2004, 12:26:24 PM, you wrote:


JB> Has anyone ever put together the dragon in the Groo Dark Horse Miniature set
JB> #5?

JB> Does it look good all put together?  Is it difficult to put together?

JB> Just curious.
JB> J


JB> _______________________________________________
JB> Groop mailing list
JB> Groop at groo.com
JB> http://mailman.newdream.net/mailman/listinfo.cgi/groop

_______________________________________________
Groop mailing list
Groop at groo.com
http://mailman.newdream.net/mailman/listinfo.cgi/groop
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.newdream.net/pipermail/groop/attachments/20041017/4ed520ce/attachment.html